| After-sales Service: | 1years |
|---|---|
| Warranty: | 1years |
| Type: | Centrifuge |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Diesel Oil Filter Disc Stack Centrifuge
Brief introduction:
Disc separator is a high efficiency, large output, advanced automation equipment. Suitable for low-solids suspension, the proportion of the smaller difference between the immiscible liquid separation, is the pharmaceutical, chemical, biological products, beverage products and other industries essential equipment. The principle is based on the centrifugal force of different proportion of the material by different force, so as to achieve the purpose of separation. The new advanced automatic control is the disc separator is superior to other separation equipment characteristics.
DHC self-discharging disc separator is a self-cleaning separator, it is by the inverter and PLC and a set of electrical components control slagging mode of equipment.
Working Principle of disc centrifuge:
DHC self-discharging disc separator can complete two operations: liquid - solid separation (separation of low concentration slurry), referred to as clarifying operation;Liquid-liquid separation (or liquid - liquid - solid) separation (separation of emulsion), referred to as the separation operation.
Disc separator is a vertical centrifuge, the drum mounted on the top of the vertical axis, driven by the motor drive and high-speed rotation. The drum has a set of disc-shaped parts that are nested with each other. There is a small gap between the disc and the disc. Suspensions (or emulsions) are fed into the drum from a feed tube located in the center of the drum. When the suspension (or emulsion) flows through the gap between the discs, the solid particles (or droplets) in the centrifuge under the action of sediment to the disc to form a sediment (or liquid layer). The sediment slides along the surface of the disc to be separated from the disc and accumulated in the largest diameter portion of the drum, and the separated liquid is discharged out of the drum through the outlet. The role of the disc is to shorten the solid particles (or droplets) of the settlement distance, expanding the drum settling area, the drum in the installation of the disc and greatly enhance the production capacity of the separator.
More photoes of disc centrifuge
4. Technical data of disc centrifuge
| Item | DHC300 | DHC400 | DHC500 | DHC550 | DHC730 |
| Drum inner diameter (mm) |
300 | 400 | 500 | 550 | 730 |
| Drum speed (r/min) | 8212 | 7070 | 6600 | 5840 | 4500 |
| Settlement area (cm²) | 17.2×107 | 27×107 | 63×107 | 76×107 | 90×107 |
| Input capacity for water (L/h) |
1250 | 3500 | 8000 | 10000 | 20000 |
| Motor power (kw) | 4.0 | 7.5 | 15 | 22 | 45 |
| Weight(kgs) | 580 | 1280 | 1720 | 2300 | 3400 |
| Dimension(mm) | 1050*850*1200 | 1495*1130*1485 | 1780*1500*1900 | 1950*1550*1960 | 2380*1730*2060 |
The bowl rotates at a high speed round the main axis, driven by a motor through hydraulic coupling and screw gear pair. stock liquid flows from the upper feeding pipe into the bowl's bottom and then will be separated through holes of disc seat. by the action of centrifugal force field, heavy liquid flows along the inner wall of discs to the inner wall of the bowl, after up flowing along them, it will be discharged by the heavy liquid pump, the light liquid will be done by the light liquid pump, which flows along the inner wall of discs into centre pipe and then up to high liquid outlet. the larger solid phase particles left will sedimentate on the bowl's wall and then will be discharged, controlled by the sliding bowl, out of the sediment outlet.
Application.
1. Mineral oil industry: marine host, land-use diesel engines, power plants and other fuel and oil purification;
2. Dairy industry: the clarification and purification of fresh milk, skim;
3. Vegetable oil industry: the purification and clarification of palm oil, vegetable oil refining degumming, off soap, dehydration and dewaxing;
4. Beverage industry: beer, fruit juice, beverages and other clarification, the extraction of vegetable protein, wastewater treatment; bio-engineering fermentation broth clarification;
5. starch industry: starch slurry concentration and classification;
6. The pharmaceutical industry: antibiotics, biochemical pharmaceuticals in the process of extraction or clarification of clarification, clarification of Chinese medicine;
7. Chemical industry: chemical raw materials purification or clarification;
8. Lanolin industry: from the scouring water extraction and purification of lanolin;
9. Latex industry: purification and concentration of natural rubber latex;
10. Other industries: such as laboratory, petroleum, coking, kaolin, pulp recycling, electrolyte treatment, waste water treatment, environmental protection, animal and plant protein extraction, animal fat extraction and refining, mixed fatty acid separation.
Microalgae extraction , the bacteria became the solid status in the liquid after high pressure homogeneous broken while broken the proportion concentration bacteria liquid . Later on the centrifuge can effectively separate the bacteria cell wall and increase the purity of bacteria dissolution.
In extraction fat acids technics selection , some extraction fat acid need dry the separated micro algae and then adopt the extraction technics which will add organic solvent , extracted algae oil and content certain amount bio-plastics , carbon and water mixture . Later the semi-solid state bio-resin , carbon and water mixture as heavy liquid and crude oil as the light liquid which it's proportion rate is about 0.9% . After the centrifugal separation for crude oil's colloid substances it can effectively degumming and dehydrate and then the refined oil proportion rate will be 0.8-0.85.
Since 2006,Our equipment has been exported to many countries all over the world such as India, Pakistan, Sri Lanka, Bangladesh, Indonesia, Philippines, Malaysia, Vietnam, Singapore, Turkey, Israel, Burma, Jordan, Yemen, Iran, Iraq, Afghanistan, Syria, Kuwait, Kazakhstan, Qatar, Korea, Azerbaijan, The UAE, Bhutan, Thailand, Lebanon, Bahrain, Egypt, Libya, Ethiopia, Kenya, Somalia, Tanzania, Liberia, Ivory Coast, Ghana, Nigeria, Cameroon, Chad, Guinea, Zambia, Zimbabwe, Malawi, Congo, Gabon, Angola, Mozambique, Botswana, Namibia, South Africa, Argentina, Bahamas, Bolivia, Brazil, Canada, Columbia, Chile, Cuba, Venezuela, Ecuador, Guatemala, Guyana, Honduras, Haiti, Mexico, Peru, Uruguay, Paraguay, Surinam, Australia, Russia etc.
Our products has passed ISO9001 International Quality Management System Certification and is exported to America, Canada, Chile, Bolivia, Indonesia, Malaysia, Israel, Iran, Egypt, Turkey, Romania, Sweden, Finland, etc. about more than 50 countries and area. We have won good reputation depends on our best qualified products and after-sales service. Warmly welcome new and old friends all over the world to come our company for good cooperation with each other.
All of Toper's products:
1. Program-controlled automatic filter press
2. Membrane filter press
3. Hydraulic compress filter press
4. Mechanical compress filter press
5. Jack filter press
6. Cast iron plate and frame/chamber filter press
7. Stainless steel plate and frame filter press
8. Round plate filter press
9. Cotton cake filter press
10. Cardboard filter press
11. DY belt filter press
12. DYX high pressure belt filter press
13. DNY rotary drum thickning/dehydrating belt filter press
14. Triple-belt thickning and dehydrating filter press
15. SS type three-foot upper discharge centrifuge
16. SD type three-foot and filter bag hoist discharge centrifuge
17. PD type filter bag hoist discharge centrifuge
18. Centrifuge of up discharge, three foot, clean series SSB, SB
19. SX type manual top discharge centrifuge
20. PS type manual top discharge centrifuge
21. SGZ type automatic scraper bottom discharge centrifuge
22. PGZ type scarper bottom discharge centrifuge
23. LW series decanter centrifuge
24. Tubular centrifuge
25. Multi-layer stainless steel frame filter
26. Bag filter
27. Diatomite filter
28. Filter plate
29. Filter cloth
30. Vacuum disc filter
Standard exported wooden package. and delivery by sea.
1. 12 months guarantee period from machine delivery date.
2. Abundant spare parts in stock are available to provide.
3. Our technicians could be dispatched for overseas service.
4. 7*24 hours technical consultation.
5. Your workers could get trained both in our factory and yours.
6. Routine tracing till the machine work properly will be done timely.
7. We will remind you to do the normal maintenance.
8. Your suggestions or any comments & reflection would be treated in priority.
9. Marketing team will visit you during our visit in your country if you require.
Q1: What is the Warranty for the machines?
A1: 12 months for free.
Q2: When can I get the price?
A2: Within 24 hours, if urgent, please directly call us.
Q3: Whether the machine price can be more discount?
A3: In general, our MOQ is 1set with very reasonable price, but if large order, we also can apply to our Manager to appropriately give you a little discount.
Q4: How to ask quotation?
A4: Please directly tell us which item you are interested in, or note us what tpye of materials, and how many tons of materials you want to treat per day or per hour, then we will send you quotation as soon as we can.
Q5: How long will it take to receive my products?
A5: As a general rule, it will take one 15-30 days for us to produce.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}